Skip to content

Plumbers on call

Call
Anytime Plumbing Atlanta
Reviewed by Charles Wake, Owner & Master Plumber Updated
Faucet & Sink Repair in Atlanta
24/7 emergency service

Faucet & Sink Repair in Atlanta

Dripping faucets waste thousands of gallons a year. We diagnose, repair, and replace fixtures with a licensed plumber and a written quote.

A dripping faucet or clogged sink drain gets worse without attention and wastes water every day. Anytime Plumbing Atlanta sends a licensed plumber to your Atlanta home to diagnose the problem, show you what's needed, and repair or replace the fixture with new supply lines and shut-offs. You'll get a written, itemized quote before work begins and a warranty on parts and labor.

4.7★★★★★232 Google reviews

In short

Faucet & Sink Repair in Atlanta typically costs $150–$450 installed, plus the fixture; most jobs take 1–2 hours on site

A real person answers 24 hours a day — typical arrival 60 minutes.

  • Since 2018
  • 24/7 emergency service
  • Upfront flat-rate prices

Faucet & Sink Repair near you

SmyrnaMariettaRoswellAlpharetta

emergencies 24/7 · 368 Angier Ave NE, Atlanta, GA 30312

Book faucet & sink repairTwo short steps
Step 1 of 2No commitment
Booking

Faucet & Sink Repair

When do you need us?

* Required

We only use your details to prepare your quote. Privacy

Flat-rate price approved by you before work starts.

4.7★232 Google reviews
8 yrsLocal since 2018
60 mintypical emergency arrival
24/7emergency line
Flat-rateprice approved before work

Limited offer

$50 off any repair

New customer, one per household

Quick facts

Faucet & Sink Repair at a glance

Typical cost
$150–$450 installed, plus the fixture
Time on site
1–2 hours
Permit
Not usually needed
How urgent
Usually can wait a few days

Which kind

Faucet and sink jobs

New faucet or sink

Installed with new supply lines and shut-offs.

Dripping faucet

Cartridge, washer or O-ring replacement.

Leaking under the sink

Supply lines, shut-off valves or the P-trap.

Low flow

Clogged aerator or cartridge from hard water.

Compare

Repair or replace—guide to faucet & sink repair options and pricing

Repair or replacement? Anytime explains the pros, cons, and price range for each option before you choose.

Cartridge or washer repair

Best when

Drips and stiff handles on a good faucet

Lowest cost

Replace the faucet

Best when

Old, corroded or leaking body

Fixture plus 1–2 hours labor

Replace trap and supply lines

Best when

Leaks under the sink

Often done with the faucet

Get it done

What does faucet & sink repair repair cost and how long does it take

Get your faucet & sink repair fixed right: call for same-day diagnosis, receive a written price, approve it, and Anytime handles the repair to code.

  • 1

    A newer low-flow model can cut water use noticeably — ask us about local rebates.

  • 2

    Replace when the body is cracked or corroded, parts are no longer made, or repairs keep coming back.

  • 3

    Repair worn washers, cartridges, flappers and fill valves — usually a quick, low-cost fix.

Call soon

How to tell if faucet & sink repair is failing before it breaks

If you see these warning signs with your, don't wait. Call Anytime Plumbing Atlanta for diagnosis before the problem worsens.

  • A drip that will not stop at the handle
  • Low flow from one faucet only
  • Water under the sink or a soft cabinet floor
  • Handles that are stiff, loose or hard to turn
  • A slow sink drain

Price range

Get a written quote for faucet & sink repair before any work starts

  • Flat-rate pricing: you get one price for the job, not an hourly meter.
  • Parts, labor and any permit listed in the written price.
JobTypical price
Cartridge repair (dripping faucet)$200 range $120–$300
Faucet replacement (kitchen or bath)$350 range $250–$450
Drain cleaning & trap replacement$280 range $150–$400
Hose bib (outdoor faucet) replacement$220 range $120–$350

Typical market ranges from local labor rates and parts prices. Your price depends on access, materials and permits — we confirm it in writing before work starts.

Separate charges

What's included in your faucet & sink repair repair price from Anytime

See what your faucet & sink repair repair price covers: service call, diagnosis, labor, and warranty are included. Parts priced per item.

What the price covers

  • On-site diagnosis and water pressure/flow test
  • Written, itemized quote before work begins
  • Supply and installation of matched cartridges, aerators, traps, or new faucet
  • New braided stainless or PEX supply lines and modern shut-off valves (where needed)
  • Testing for leaks and full flow restoration
  • Clean-up and warranty documents (typically 1 year on labor, cartridge warranty per manufacturer)

Extra only if needed

  • +Drywall or tile cutting to access hidden lines (may be quoted separately as a scope addition)
  • +Slab excavation or foundation work to repair water lines (requires separate estimate)
  • +Replacement of main water shutoff valve or meter work (handled by the water utility)
  • +Cosmetic updates like new cabinet hardware or sink refinishing

Good to know: If a plumber finds corrosion, polybutylene pipe, or galvanized steel lines at the end of their life during a repair, the cost estimate may increase. Many homes built before 1980 in Atlanta have materials that are prone to failure. Always ask the plumber to identify any additional concerns and quote them separately so you can decide whether to address them now or later.

What changes the price

What affects the cost of faucet & sink repair

  1. 01Service call or diagnostic fee: $75–$150 (often credited toward labor if work proceeds)
  2. 02Labor rate: $75–$150 per hour, plus a 1.5–2× multiplier for emergency or after-hours calls
  3. 03Cartridge or valve part: $25–$100 depending on brand and type
  4. 04New faucet: $80–$300+, plus $100–$150 for installation, supply lines, and shut-offs
  5. 05Access difficulty: tight vanity, slab, or crawl space can add 0.5–1 hour of labor
  6. 06Code upgrades or permits: modern shut-offs, anti-scald mixing valves, or permit fees may apply

Start to finish

What to expect when you book Anytime for a plumbing repair

Anytime Plumbing Atlanta moves fast: call or book online, get diagnosed same day, receive a written price, approve the work, and it's done to code.

  1. 1

    Tell us what is wrong

    Describe the problem and we set a time window — 60 minutes.

  2. 2

    Diagnosis on site

    A licensed plumber checks the system and pins down the fault.

  3. 3

    You say yes to the price

    One flat-rate price in writing. No hourly meter.

  4. 4

    Fixed the right way

    Done to code.

  5. 5

    Walk-through and clean-up

    We clean up and walk you through what we did.

How faucet and sink repair works

A licensed plumber arrives at your home with diagnostic tools and parts inventory. The first step is to isolate the problem: Is the faucet dripping because the cartridge is worn, the aerator is clogged, or the shut-off valve is leaking? Is the sink slow because of a clog in the trap, a blockage deeper in the line, or mineral buildup on the aerator? The plumber tests water pressure, turns the faucet on and off to feel resistance, and may open the cabinet under the sink to check the trap and supply lines.

Once the problem is clear, the plumber gives you a written, itemized quote. Repairs usually involve removing the handle and faucet cap, extracting the cartridge or ball, and replacing it with a matched part from a wholesaler or the manufacturer. If the faucet body is cracked or the cartridge cannot be sourced, a full replacement is the right move. Drain clogs are cleared by removing and cleaning the trap or running a cable or hydro-jet through the line. After repair or replacement, the plumber tests for leaks, checks water pressure and flow, cleans up debris, and leaves you with warranty paperwork.

What affects the cost of faucet repair in Atlanta

Labor is the biggest variable. A plumber in Atlanta charges $75–$150 per hour; simple cartridge repairs take 30 minutes to 1 hour, while full replacements take 1.5–2 hours. A service call or diagnostic fee of $75–$150 is charged upfront, then labor and parts are added. Access matters: If the faucet is easy to reach (pedestal sink, kitchen island), the job is faster. If the sink is built into a tight vanity, recessed into tile, or on a slab foundation, the plumber may need extra time to access the supply lines and shut-offs.

Parts vary by brand and type. A cartridge for a Moen faucet costs $25–$60, while a Kohler or Delta cartridge may be higher. A new faucet itself ranges from $80 to $300+ depending on style, material, and features; WaterSense-labeled low-flow faucets may qualify for rebates of $50–$150 from Atlanta-area water utilities if you are replacing an older fixture. If the old trap is rusted or the supply lines are corroded, replacement parts add cost. Code upgrades—such as installing modern shut-off valves, new braided stainless supply lines, or anti-scald mixing valves—can also affect the total. Emergency or after-hours calls carry a premium labor rate.

Compare

Our standards vs. what to check with any plumber

Anytime Plumbing AtlantaWhat to check with any plumber
Price in writing firstOne flat price, approved by youGet parts, labor and fees in writing
PermitsWe pull the permit when one is requiredAsk who pulls the permit and books the inspection
Clean-upWe clean up and explain what we didAgree clean-up before work starts
Anytime Plumbing Atlanta plumber with a homeowner
G4.7 ★★★★★232 Google reviews

Fixed right

Written price before any work—no surprises on the bill

Call Anytime for fast diagnosis, honest pricing, and warranty coverage. We work nights, weekends, and holidays across the Atlanta area.

Local since 2018

Anytime Plumbing Atlanta has been fixing plumbing in Atlanta for 8 years — we know the pipes, the water and the permit office.

Flat-rate pricing available

You approve the price before we start — no hourly meter, no surprise add-ons.

Fast response — 60 minutes

Day or night, call and a plumber gets moving.

4.7★ from 232 reviews

Real Google reviews from homeowners we have worked for.

We cover

Where Anytime handles faucet & sink repair repair across Atlanta

Communities served · By area

Service ZIP codes

31401303033000830080300753000431106300923008430144301263050130264302693013430294302813016130114301883009630043302913132230252300243003030012300393012030680301013021430071300473001430052301273013230518

Not sure if we cover you? Call (833) 640-0288 or send your ZIP.

References

Sources behind these figures

Prices are typical ranges, confirmed in writing before work starts. How we price · Cost report

  • Local water utility rate schedule
  • EPA WaterSense Rebate Finder
  • Local plumber rate surveys and quotes (estimate)
  • U.S. EPA WaterSense

Quick answers

Do you warranty faucet & sink repair work and do you offer financing

Still have questions? Ask us or call (833) 640-0288.

Do you offer 24/7 emergency plumbing?
Yes — call (833) 640-0288 any time, day or night, including weekends and holidays. Typical arrival is 60 minutes.
How do you price jobs?
Flat-rate: after we diagnose the problem you get one price for the whole job, in writing, before we start.
What areas do you serve around Atlanta?
ZIP codes include 31401, 30303, 30008, 30080, 30075, 30004, 31106, 30092, 30084, 30144, 30126, 30501 and more. Call to check your address.
How much does faucet repair cost in Atlanta?
A typical faucet repair in Atlanta costs $150–$350, depending on the cartridge, aerator, or valve type and how long the job takes. A service call and diagnosis typically cost $75–$150, then the plumber quotes parts and labor separately. Replacement fixtures cost $200–$450 installed. Labor runs $75–$150 per hour; access difficulty, brand, and code upgrades affect the final price. Call Anytime Plumbing Atlanta for a site visit and written quote.
What causes a faucet to drip?
A dripping faucet almost always means the internal cartridge, washer, or aerator has worn out or become stiff. Hard water and mineral buildup speed up wear, especially in homes on municipal water. When the cartridge fails, water leaks past the seal even when the handle is off. A plumber can replace just the cartridge (cheapest fix) or the whole faucet if the damage is old or the fixture is damaged.
How do I fix a slow kitchen sink drain?
A slow drain is usually hair, soap, food debris, or grease buildup in the trap or stub pipe under the sink. A plumber removes the P-trap, clears the blockage by hand or with a drain auger, cleans the trap, and reinstalls it. In some cases the trap itself has corroded (especially in older Atlanta homes with cast iron pipes) and must be replaced. If the clog is deeper in the line, the plumber may need to run a cable or use a hydro-jet.
Can I replace a sink faucet myself?
Replacing a faucet is possible for confident DIYers, but mistakes (cross-threading supply lines, leaving debris in the lines, forgetting the aerator) cause leaks and callbacks. A licensed plumber ensures the new faucet is matched to your sink, supply lines are new and correct size, shut-offs work, and everything is tested and sealed. Cost is $200–$350 installed, which often saves money compared to fixing mistakes later.
How long does a faucet repair take?
A cartridge or aerator repair takes 30 minutes to 1 hour. A full faucet replacement takes 1–2 hours if access is easy. If the sink is on a slab, in a vanity with tight plumbing, or if old pipes need upgrading, the job can take 2–3 hours. The plumber quotes time on site after seeing the job.
What is the difference between a cartridge faucet and a ball faucet?
A cartridge faucet has a single handle and an internal cartridge that controls hot and cold flow and stops leaks when you turn it off. A ball faucet (like a Delta) has a rounded cap over a ball mechanism with grooves that mix water. Both can drip, but cartridges are easier and cheaper to repair (replace the cartridge for $30–$80 in parts). A plumber can identify which type you have and quote the repair.
Do I need a permit to replace a sink or faucet?
In most Atlanta neighborhoods, a simple faucet or sink replacement does not require a permit if it is not tied to a sewer or water main repair. However, if you are replacing the trap, supply lines, or drainpipe, or if the work involves gas, the city or county building department may require a permit. A licensed plumber knows the rules and will pull a permit if needed to keep your work code-compliant and insurable.

Get faucet & sink repair fixed today—call or request an appointment now

Call any time, day or night, or book online and we will confirm a time.

Anytime Plumbing Atlanta

368 Angier Ave NE, Atlanta, GA 30312

(833) 640-0288 · [email protected]

Directions on Google Maps →

Cost guides

Plumbing Cost Guides by JobWater heater replacement (tank) CostDrain cleaning CostWhole-house repipe (PEX) CostSewer line replacement Cost

Costs, rebates & financing

Water Heater & Plumbing RebatesPlumbing Financing & Repayment CalculatorWater Leak Cost Calculator

Guides

How Much Does a Plumber Cost in United States? (2026 Guide)Tank vs Tankless Water Heater: Which Is Worth It in United States? (2026)Water Heater Rebates and Tax Credits in United States (2026 Update)What Size Water Heater Do I Need?

BookWhatsApp Day or night · (833) 640-0288
Tap to call