Data · updated 2026-11-04
Atlanta, GA Plumbing Cost Report 2026
What does a plumber cost in Atlanta, GA? Licensed plumbers here typically charge $85–$175 an hour, with a service-call fee of about $95. This report collects the local numbers behind our prices — labor rates, water costs, water hardness, winter freezes, housing age and typical job prices — so homeowners can check a quote and anyone can cite the figures.
Compiled by Anytime Plumbing Atlanta from public data and local rate surveys. Free to cite with a link to this page.
Job prices
Typical plumbing job prices in Atlanta, GA (2026)
Installed price ranges for common jobs, adjusted for local labor rates. Parts are national; labor is local. Every price is confirmed in writing before work starts.
| Job | Typical price | Time on site |
|---|---|---|
| Water heater replacement (tank) | $1,400–$3,750 installed, 40–50 gal tank | 2–4 hours |
| Tankless water heater installation | $3,000–$6,950 installed, gas tankless | 4–10 hours |
| Heat pump water heater installation | $2,700–$5,900 installed, before rebates | 3–6 hours |
| Drain cleaning | $150–$550 per drain | 1–2 hours |
| Hydro jetting | $400–$950 per line | 2–4 hours |
| Sewer camera inspection | $150–$550 per inspection | 1–2 hours |
| Sewer line replacement | $3,200–$26,800 per job | 16–40 hours |
| Trenchless sewer lining | $4,300–$21,450 per job (trenchless) | 8–24 hours |
| Main water line replacement | $1,600–$5,350 per job | 8–20 hours |
| Whole-house repipe (PEX) | $4,300–$16,100 whole house, PEX | 24–60 hours |
| Whole-house repipe (copper) | $8,600–$26,800 whole house, copper | 40–90 hours |
| Slab leak repair | $1,600–$4,300 per repair | 6–16 hours |
| Leak repair | $150–$850 per repair | 1–4 hours |
| Toilet installation | $250–$750 installed, plus the fixture | 1–3 hours |
| Faucet installation | $150–$500 installed, plus the fixture | 1–2 hours |
| Garbage disposal installation | $200–$650 installed | 1–2 hours |
| Sump pump installation | $650–$2,150 installed | 2–6 hours |
| Water softener installation | $1,600–$4,800 installed | 2–5 hours |
| Gas line installation | $550–$2,700 per job | 3–10 hours |
| Service call / diagnostic | $100–$200 trip / diagnostic fee | 0.5–1 hours |
| Emergency call-out | $150–$400 after-hours fee, before the repair | 1–3 hours |
| Backflow test | $100–$250 per device | 0.5–1 hours |
Local data
Plumbing costs and conditions by city
Labor rates, service-call fees and water costs set the price; hard water, freezing days and older homes change what goes wrong.
| City | Plumber $/hr | Service call | Water $/1,000 gal | Hardness (gpg) | Freezing days | Median year built | Water utility |
|---|---|---|---|---|---|---|---|
| Atlanta, GA | $85–$175 | $95 | $9.8 | 2 | 40 | 1980 | Atlanta Department of Watershed Management |
Cite this report
How to cite these figures
Anytime Plumbing Atlanta. (2026). Atlanta, GA Plumbing Cost Report 2026. Retrieved from https://anytimeplumbingatlanta.com/plumbing-cost-report/
Figures are estimates from public sources and local rate surveys, reviewed at least once a year. Read how we price and where the data comes from.
References
Sources behind these figures
Prices are typical ranges, confirmed in writing before work starts. How we price · Cost report
- Local water utility rate schedule
- EPA WaterSense Rebate Finder
- Local plumber rate surveys and quotes (estimate)
- ENERGY STAR — water heaters
- U.S. EPA WaterSense
Get a plumber to your home today—call or request online
Call any time, day or night, or book online and we will confirm a time.
Anytime Plumbing Atlanta
368 Angier Ave NE, Atlanta, GA 30312
(833) 640-0288 · [email protected]
Directions on Google Maps →